tension jack pull test kit

Tension Jack/Pull Test Kit - DSI Underground Canada

30 Ton Capacity Test Kit General Features The pull test kit consists of two assemblies: a mechanical assembly which includes a claw, stand, nut, &... Tension Jack/Pull Test Kit - DSI Underground Canada

Anchor Test System | Measuring the anchor strengths in

• When testing Split Set , Swellex , or forged head bolts, the pull collar must be put onto the bolt BEFORE installation of the bolt • 30 ton units available for sale or rent • Comes complete with wooden crate ™ ™™ • Pull test collars available upon request Tension Jack/Pull Test Kit 30 ton capacity Complete Assembly www ...

Pull Tester - Pull Testers - MARK-10

Long Pull Stroke. The Standard Anchor System has a pull stroke of 2 inches (50mm) with an option to extend to 4 inches (100mm). The increased stroke has the following advantages: Complete extraction of most fixings after test in one simple operation. When fixings are tested to failure, they usually need to be fully extracted from the base material.

Automatic Pull-Off Adhesion Tester | 20mm Kit - Elcometer 510

Mark-10 Pull Testers consist of several components, each of which are available separately. These pull testers are suitable for applications such as wire terminal and wire crimp testing, connector removal testing, peel testing, and more. Configure your pull tester from a wide range of test stands, force gauges, grips, and accessories.

Hilti HAT 28M (Master) Anchor Tester Kit | Hire | Inlec

The Elcometer 510 Automatic Pull-Off Adhesion Tester accurately measures the strength of the bond between the coating and the substrate. Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable results; Set adjustable pull rates @ 0.2, 0.3, 0.7, 1.0, 1.2 MPa/s(30, 50, 100, 150, 180psi/s)

Pull Testing Machines and Pull Testers - TestResources, Inc

The Hilti HAT 28M (Master) Anchor Tester Kit is used for testing pull-out loads of anchors, ringbolts, insulation anchors, DX pins and studs, and screws in test labs and on site. Hire a Bolt Testing Kit from Inlec UK for Next Day Delivery.

PULJAK Company: Products & Instructions

Pull Testing Machines and Pull Testers : TestResources offers test fixtures, ovens, grips and other test machine accessories compatible with many popular test machine brands. We also offer control system upgrades and a broad line of new general purpose test machines as summarized below.

Cable Tensioner Mark2 - DSI Underground Canada

PULJAK Company manufactures the PULJAK 4-way fence tool. Fondly known as the 'Fenceman's Friend' the PULJAK allows individuals to lift, pull, align and stretch chain link fence and gates. Proudly made in the USA, you can rely on the PULJAK for your fence and gate installation needs. ... With tension bar in fence, (using 'Type A' PULJAK) hook ...

Tools & Hardware | Rock Support | Thiessen Team

The jack weighs 25 lbs. The entire kit (jack and pump) weighs 51lbs. Two grip handles allow for operation by one person. Unit locks on the cable, until lanyard is pulled to release spring loaded grippers. Can be configured for all cable bolts, from 0.6" to 0.7" and the DSI Underground 0.9" HITEN cable bolt. Capacity: 48,500 lbs

Road Header Machine Manufacturer,Hydraulic Gear Pump

Thiessen Team carriers a variety of tools and hardware for rock support and rock stabilization.

Standard Test Method for Rock Bolt Anchor Pull Test1 This standard is issued under the fixed designation D 4435; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A

Shijiazhuang Coal Mining Machinery Co., Ltd. is Manufacturer,Supplier,Exporter of Road Header Machine, Hydraulic Gear Pump, Gear Pump, Industrial Pump, Slurry Pump, Industrial Road Header Machine etc based in Hebei, China.