-
Strand jack - Wikipedia
A strand jack (also known as strandjack) is a jack used to lift very heavy (e.g. thousands tons or more with multiple jacks) loads for construction and engineering purposes. Strandjacking was invented by VSL Australia's Patrick Kilkeary & Bruce Ramsay in 1969 for concrete post tensioning systems, and are now used all over the world for heavy lifting, to erect bridges, offshore structures ...
-
Strand jack system - mammoet.com
A strand jack is a system similar to a jack, however in this case the load is not pushed up, but the jack pulls up a bundle of wires, which is called a strand. The system has two clamps: the bottom clamp is fixed and the upper clamp is connected to a hydraulic cylinder that can move up and down. Both clamps are gripping a steel wire. To start lifting the bottom clamp releases the wire and the ...
-
Hydraulic Strand Jacks | Strand Jack Systems | Enerpac
The strand jack lifting technique originates from the concrete post tensioning principle. A strand jack can be considered a linear winch. In a strand jack, a bundle of steel cables or strands are guided through a hydraulic cylinder; above and below the cylinder are anchor systems with wedges that grip the strand …
-
VSL | Heavy Lifting
HEAVY LIFTING. The VSL hydraulic strand lifting system provides a custom-engineered solution for the toughest jobs. It combines proven components from VSL’s strand post-tensioning system with hydraulic jacks and pumps to lift heavy loads safely and economically.
-
What is a Strand Jack. What are Strand Jacks?
Strand jacks are specially configured hydraulic jacks, which can give continuous pulling or lifting movement. A combination of a number of strand jacks can lift very heavy loads of thousands of tons, whereas the jack itself weighs less and occupies only a very small footprint. Hydraulic jacks are small devices that can do a large work using hydraulic pressure.
-
DLT Strand Jacks 15 to 1672 tonnes capacity per jack
We put a lot of thought into the efficient use of our strand jack systems. Below is our standard jack carriage system for assembling the jack, strand and fixed anchor at ground level. The complete jack carriage can then be lifted into position on the job site as shown in the below picture.
Our Factory
Founded in 2012, Gaode Equipment Co., Ltd. (short:“Gaodetec”) owns the most advanced imported production equipment and complete production technology...
Read MoreOur Meters
Factory Gallery
Contact Us
- Gaode Equipment Co., Ltd.
- peate@gaodetec.com
- www.hydraulicjackforsale.com